Recruitment post
Position
Number of Recruits
Educational
Salary
More
Responsibilities:
1. Assist in the design of the FPGA part of the scheme to ensure the integrity and accuracy of the design scheme;
2. Assist in the development and implementation of the FPGA part of the project, and write the FPGA code of the system to ensure that the code performance meets the product requirements;
3. Familiar with XILINX or ALTERA FPGA design process, can skillfully use large-scale logic design related development tools (such as comprehensive tools, simulation tools, etc.);
4. Understand DDR2, DDR3, RapidIO, PCIE and other high-speed interface debugging;
5. Write design documents and related technical data;
6. Cooperate with hardware engineers to complete the design of FPGA schematic diagram in the project.
Requirements:
1. Bachelor degree or above, major in electronics or communication;
2. Proficient in VHDL/Verilog HDL/System Verilog HDL and other hardware programming languages (at least one);
3. Familiar with Xilinx/Intel FPGA architecture;
4. Familiar with Qaurtus II, Vivado and other development tools, with good code programming style;
5. At least 2 years of programmable logic development, practical project experience is preferred;
6. cheerful personality, strong learning ability, good communication skills and team spirit.
Responsibilities:
1. Code review and optimization;
2. Preparation of relevant technical documents;
3. Responsible for the development and maintenance of DSP-based software.
Requirements:
1. Bachelor degree or above, major in computer software;
2. Proficient in C/C and other languages;
3. Familiar with VisualDSP, ccs and other development environment;
4. Experience in military industry is preferred;
5. Experience in radar and communication field is preferred;
6. cheerful personality, strong learning ability, good communication skills and team spirit;
7.1-3 years working experience.
Responsibilities:
The overall work of the radar equipment. Including the whole machine requirements analysis, scheme design, index decomposition, technical status management, organization of debugging and testing and acceptance delivery.
Requirements:
1. Bachelor degree or above, major in electronics, automation, signal processing or related;
2. Engaged in the overall work of radar system for not less than 2 years; Familiar with the development process of radar or similar equipment, and participated in the whole process of not less than 5 complete machine research and development;
3. Software or hardware R & D experience is preferred, radar equipment development experience is preferred.
Responsibilities:
1. be able to independently be responsible for the design of frequency source of rf and microwave circuits, device selection, drawing and building bom table, writing relevant technical documents according to standardization requirements, filing and cooperating with production department for mass production.
2. Responsible for product RF circuit debugging.
3. Cooperate with the project chief engineer in the demonstration and design of the new project.
4. Cooperate with the test engineer to build an automated test platform.
Requirements:
1. Bachelor degree or above in electronic engineering/communication/electromagnetic field and microwave technology, with good theoretical foundation of microwave and millimeter wave, bachelor degree or above in electromagnetic field and microwave, radio physics, electronics and communication engineering, with more than 3 years of radio frequency related work experience.
2. Familiar with DDS, PLL, PDRO, comb spectrum frequency source and PLL PLL and other hybrid ring principle, design and related circuit debugging;
3. Have experience in designing and debugging RF circuits in different frequency bands, and be able to adapt to a certain degree of overtime;
4. Proficient in the use of spectrum analyzer, network analyzer, signal source, oscilloscope and other measuring instruments;
5. Proficient in using DXP/Candence, AutoCAD, HFSS, ADS and other circuit design software;
6. Good coordination and communication skills, team spirit and professionalism.
Responsibilities:
1. Be able to independently be responsible for the design of radio frequency, microwave circuit and TR module channel, device selection, drawing, bom table preparation, preparation of relevant technical documents according to standardization requirements, filing and mass production with the production department.
2. Responsible for product RF circuit debugging.
3. Cooperate with the project chief engineer in the demonstration and design of the new project.
4. Cooperate with the test engineer to build an automated test platform.
Requirements:
1. Bachelor degree or above in electronic engineering/communication/electromagnetic field and microwave technology;
2. Have a good theoretical foundation of microwave and millimeter wave, electromagnetic field and microwave, radio physics, electronics and communication engineering, with more than 3 years of RF related work experience.
3. Familiar with the principle and key indicators of microwave devices such as power amplifier, low noise amplifier, frequency converter, filter, PLL, coupler, etc;
4. Have experience in designing and debugging RF circuits in different frequency bands, and be able to adapt to a certain degree of overtime;
5. Proficient in the use of spectrum analyzer, network analyzer, signal source, oscilloscope and other measuring instruments, familiar with the microwave anechoic room test environment;
6. Proficient in using DXP/Candence, AutoCAD, HFSS, ADS and other circuit design software;
7. Phased array RF front-end development experience is preferred;
8. Good coordination and communication skills, team spirit and professionalism.
Responsibilities:
1. Participate in the system design of the hardware part of the overall plan, and participate in the technical review of hardware design;
2. Responsible for hardware project program evaluation, requirements analysis and program demonstration;
3. Responsible for hardware single board scheme design, device selection, schematic diagram and PCB design;
4. Responsible for hardware debugging and testing;
5. Cooperate with software personnel for testing and debugging;
6. Maintain and manage or assist in the management of the developed hardware.
7. Responsible for project documentation and quality records;
8. Responsible for pre-sales technology and after-sales service;
9. Complete other tasks assigned by the leadership.
Requirements:
1. Bachelor degree or above, major in electronics or communication; Good command of English, can read English materials;
2. Major in electronics, communication, automation, etc., at least 3 years of hardware design experience;
3. Proficient in hardware development related tools (Oracd, Allegro, Altium Designer, etc.), familiar with hardware development process.
4. Familiar with all kinds of circuit testing and debugging instruments (multimeter, oscilloscope, frequency source, spectrum analyzer, vector network analyzer, power meter, etc.).
5. Experience in high-speed digital electronic circuit development and analog-digital hybrid circuit design, with system hardware design experience is preferred;
6. Familiar with hardware architecture and peripheral circuits of mainstream devices such as Alter/Xilinx FPGA.
7. Have strong system analysis ability, can quickly locate faults and provide solutions.
8. Familiar with SRIO, PCIe, CAN, RS422/RS485 and other hardware regular bus, with Verilog HDL experience is preferred;
9. cheerful personality, strong learning ability, good professionalism, professionalism and team spirit; have strong practical ability.